Figure 1 Map of the Troll sampling sites. The figure shows the sampling location of the Troll samples.

PFT�� manufacturer Sample Tplain was taken from the Troll plain. Samples Tpm1-1 and Tpm1-2 were taken from the large pockmark named pm1. Samples Tpm2 and Tpm3 were taken from two smaller pockmarks named pm2 and pm3 respectively. Table 1 Sample site description Parameter unit OF1 OF2 Tplain Tpm1-1 Tpm1-2 Tpm2 Tpm3 Position Latitude (N)- longitude (E) 59.594333- 10.633267 59.623800-10.626483 60.631117- 3.787293 60.63132- 3.789782 60.631441- 3.790041 60.630721- 3.78115 60.629635- 3.782211 Water depth m 212 200 305 315 315 311 311 Sediment depth cm bsf Talazoparib 5-20 5-20 5-20 5-20 5-20 5-20 5-15 Sediment type   Silty clay Silty clay Silty clay Silty clay Silty clay Silty clay Silty clay NH3 mM 0.3821 0.2464 0.0021 0.0399 0.0387 0.0667 0.0907 NO3 + NO2 mM 0.0004 0.0004 0.0106 0.0011 0.0019 0.0031 0.0045 TOC % 1.39 1.46 1.08 0.54 0.64 0.7 GDC-0449 chemical structure 0.67 HCO3-C mM 38.25 32.00 10.33 12.08 10.33 16.17 9.60 Cu mM 0.01 0.01 0.07 0.03 0.06 0.02 0.15 Sum C10-C36 μg/kg 587 368 1276 4993 2840 4547 4289 The table shows the sampling location and an overview of the chemical data obtained by the Norwegian Geotechnical Institute in the Petrogen project [25]. Figure 2 Flowchart

showing the workflow for taxonomic and metabolic binning followed by statistical analyses. The Y-27632 2HCl flowchart gives an overview of the methods used to create and analyze metagenomes from the two sampling areas

(The Troll and Oslofjord areas). Abbreviations used in the figure are: MG-RAST (the Metagenomics RAST server), STAMP (Statistical Analysis of Metagenomic Profiles), MEGAN (Metagenome Analyzer), ncbiPnr (NCBI non-redundant Protein Database) and SILVA SSU (small sub unit) and LSU (large sub unit). Sequencing coverage and taxonomic richness After quality filtering and removal of artificial replicates the number of reads in our metagenomes ranged from 607557 (Tpm2) to 1227131 (Tpm1-2), with average read lengths between 337 ± 131 (Tpm3) and 378 ± 128 (OF2) bases (Table 2). In the following text all percentages are given as percentage of the total reads, after filtering, in each metagenome. Table 2 Metagenome overview Metagenome OF1 OF2 Tplain Tpm1-1 Tpm1-2 Tpm2 Tpm3 Total sequence (M bases) 342 347 297 239 425 208 303 Total reads 914076 918989 850039 663131 1227131 607557 898796 Average read length (bases) 374 ± 128 378 ± 128 349 ± 134 361 ± 131 346 ± 131 343 ± 131 337 ± 131 Average GC content (%) 48.9 ± 10.7 47.5 ± 10.9 53.9 ± 10.7 49.9 ± 11.5 50.6 ± 12.0 49.3 ± 11.8 49.8 ± 11.0 EGS Mbp 4.9 4.8 5.1 4.7 5.0 4.6 5.0 Total reads assigned to the 16S rRNA gene1 926 914 861 776 1358 671 936 (% of total reads) 0.10 0.10 0.10 0.12 0.11 0.11 0.